ECOVAS
ECOVACS Goat O1000 Lidar PRO Robot Lawn Mower, Wire-Free Mapping with Lidar Navigation, AI Obstacle Avoidance, Smart Edge Mowing, App Control, for Lawns up to 1/4 Acre
ECOVACS Goat O1000 Lidar PRO Robot Lawn Mower, Wire-Free Mapping with Lidar Navigation, AI Obstacle Avoidance, Smart Edge Mowing, App Control, for Lawns up to 1/4 Acre
Couldn't load pickup availability
Share
Product description
-
Why the GOAT cannot be connected to the network？
1. Ensure you're using a 2.4GHz network with Bluetooth ON.
2. Move the robot closer to the router for a stronger signal.
3. Follow the guide: Press and hold the charging button until the countdown ends.
Tip: Restart the GOAT if the issue persists.
-
How do I install the trimmer module?
Use the 3 included screws (2 spare, 1 pre-installed). A PH2 Phillips screwdriver (>10 cm) is recommended. Open the side rubber cap to access holes and adjust the angle slightly if alignment is tight.
-
How do I start a trimming task?
Two ways to start trimming:
• Manual: Select Trim mode in the app, choose boundary, tap start.
• Schedule: Set a fixed time in Schedule for automatic start.
Note: Trimming is louder than mowing—schedule during daytime to avoid disturbing neighbors.
-
Why does the trimmer module scrape against edges or corners?
For smooth trimming:
• Clear boundary obstacles to keep vision unobstructed.
• Avoid edges with 5–7 cm (2–3 in) steps to prevent sticking.
• Map sharp corners slightly inward so GOAT can cut close to edges while reducing contact with walls or rocks.
-
What if the trimmer line is not tangled?
• Manual Release: Press the button on the trimmer cover to pull out a line segment.
• Mapping Tip: Map sharp corners slightly inward to reduce collisions with walls or rocks and prevent line snapping.
- Wire-Free Robotic Lawn Mower with LiDAR Navigation - GOAT O1000 LiDAR PRO is a wire-free robotic lawn mower that requires no perimeter wire or RTK antenna. The HoloScope 360° Dual-LiDAR system automatically maps your yard and delivers precise 2 cm positioning — even under trees, near fences, or in shaded areas where GPS mowers lose signal.
- Built-In Edge Trimming for Clean Borders - Unlike standard robot lawn mowers, this model features an integrated TruEdge trimmer for true edge-to-edge cutting. It trims along driveways, sidewalks, flower beds, and irregular lawn borders — reducing the need for manual string trimming after mowing. (For highly complex corners, narrow gaps, or raised edges, occasional manual trimming may still be needed.)
- Advanced 3D Obstacle Detection for Safer Mowing - Powered by AI Vision and 3D ToF LiDAR, GOAT O1000 LiDAR PRO accurately identifies and navigates around more than 200 types of obstacles — from kids’ toys and patio furniture to pets and small wildlife. With detection precision down to 5 cm, it maintains safe clearance while mowing closely around objects, helping protect your lawn, landscaping, and loved ones.
- Easy App Setup with Custom Zones & No-Go Areas - Use the ECOVACS app to create mowing zones, adjust schedules, and customize no-go areas for challenging sections of your yard. Initial setup and fine-tuning may require a few adjustments to optimize performance for unique lawn layouts.
- Designed for Tight Spaces Others Can’t Reach - Built with a super-narrow body, GOAT O1000 LiDAR PRO easily passes through tight paths and narrow lawn corridors as slim as 0.8 m. Perfect for compact yards, side lawns, and complex layouts where larger robotic mowers struggle.